009176002001906 [KYOCERA AVX]
PCB Connector;![009176002001906](http://pdffile.icpdf.com/pdf2/p00260/img/icpdf/009176002001_1572229_icpdf.jpg)
型号: | 009176002001906 |
厂家: | ![]() |
描述: | PCB Connector PC 连接器 |
文件: | 总9页 (文件大小:363K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Discrete Wire IDC
Series 9176
The 917X series of surface mount Insulation Displacement Connectors (IDC)
were developed to meet the harsh automotive and industrial market
applications for connecting individual wires directly to a PCB ranging from 14
AWG to 28 AWG. This industry proven contact system has been tested to
automotive levels of shock, vibration, and temperature cycling to prove their
reliability and robustness. The simplicity of inserting a wire into the connector
with a small tool allows a wide range of devices to be connected to the PCB
without soldering. In SSL applications specifically, these connectors are used to
bring power and signal onto the PCB or are used to daisy chain multiple boards
together in a long string. While the IDC contact provides a gas-tight connection
to conductor of the wire, the housing has been designed to grab the insulation
of the wire to provide a positive strain relief even in the harshest conditions. In
case of repair, the wires can be removed and replace up to three times.
The 9176 series accepts 18 AWG to 24 AWG wires with an insulation diameter
ranging from 1.1mm to 2.1mm. These dual contact connectors support a 10
amp current rating with two large SMT solder tails per wire to provide maximum
stability on the PCB. Available in 1p-3p configuration, these connectors can be
end stackable for higher pin counts. The 9176 series also comes with optional
locking strain relief caps that act as the termination tool for severe vibration
applications.
APPLICATIONS
FEATURES AND BENEFITS
• Connecting discrete wire components
• IDC contact provides a gas-tight connection to the PCB for long term reliability
directly to the PCB
•
•
Connector housing captures the wire insulation for positive strain relief
Tested to automotive levels on shock, vibration and temperature cycling for
reliability
• Bringing power and signals onto a PCB
• Daisy chaining PCB’s together to create
a continuous string of boards
•
•
•
•
Low and high volume assembly tools to match production volumes
Reduced total applied cost versus solder or crimp processes
Optional thru and end caps lock in place to provide maximum strain relief
High temperature insulator capable to 260ºC reflow soldering processes
• Application Notes: refer to 201-01-124
ELECTRICAL
ENVIRONMENTAL
MECHANICAL
• Current Rating: 10 Amp / Contact
• Voltage Rating: 250 VAC
• Operating Temperature:
-40ºC to +125ºC
• Insulator Material: Nylon 46: UL94V0
• Contact Material: Phosphor Bronze
• Plating: Tin over Nickel
• Durability: 3 Cycles
HOW TO ORDER
00X
00X
X
06
00
9176
Number of Ways
No of
Wire Gauge Size
Color/Approval
Plating
Option
06 = Pure Tin
all over
Prefix
Series
Code Color
Approval
Black Special Order
White Standard
White UL Approved
Code
Accepted
Wire Gauge
Wire
Cap Code
Code
Details
Ways
Insulation Pages 13-14
0
1
9
001
002
003
1
2
3
Page 11
Page 12
Page 13
18 Gauge
001
011
022
032
Ø 1.6-2.1
Ø 1.6-2.1
Ø 1.1-1.6
Ø 1.1-1.6
021
021
016
016
Solid or Stranded
20 Gauge Stranded
Solid or Stranded
22 Gauge Stranded
Solid or Stranded
24 Gauge Stranded
Solid or Stranded
Certification: UL File # E320991, check UL conditions of use for specific ratings and details
9
Discrete Wire IDC
Series 9176
CONNECTOR/TOOLING PART NUMBER MATRIX
SERIES 9176 IDC
HAND INSERTION TOOLING*
ACCESSORY CAPS
Through Wire Wire Stop
Wire
Insulation
Plastic
Metal
(high volume)
Mass
Termination
N/A
AWG
Positions
Color
Part Number
(medium volume)
18
18
18
18
18
18
18
18
18
20
20
20
20
20
20
20
20
20
22
22
22
22
22
22
22
22
22
24
24
24
24
24
24
24
24
24
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.6 - 2.1
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
Ø 1.1 - 1.6
1p
1p
1p
2p
2p
2p
3p
3p
3p
1p
1p
1p
2p
2p
2p
3p
3p
3p
1p
1p
1p
2p
2p
2p
3p
3p
3p
1p
1p
1p
2p
2p
2p
3p
3p
3p
White 009176001001106 069176701601000 069176701701000
Black 009176001001006 069176701601000 069176701701000
UL White 009176001001906 069176701601000 069176701701000
White 009176002001106 069176701601000 069176701701000 069176701701002 609176002021100 609176002021199
Black 009176002001006 069176701601000 069176701701000 069176701701002 609176002021000 609176002021099
UL White 009176002001906 069176701601000 069176701701000 069176701701002 609176002021100 609176002021199
White 009176003001106 069176701601000 069176701701000 069176701701003 609176003021100 609176003021199
Black
609176001021100 609176001021199
609176001021000 609176001021099
609176001021100 609176001021199
N/A
N/A
009176003001006 069176701601000 069176701701000 069176701701003 609176003021000 609176003021099
UL White 009176003001906 069176701601000 069176701701000 069176701701003 609176003021100 609176003021199
White 009176001011106 069176701601000 069176701701000
Black 009176001011006 069176701601000 069176701701000
UL White 009176001011906 069176701601000 069176701701000
White 009176002011106 069176701601000 069176701701000 069176701701002 609176002021100 609176002021199
Black 009176002011006 069176701601000 069176701701000 069176701701002 609176002021000 609176002021099
UL White 009176002011906 069176701601000 069176701701000 069176701701002 609176002021100 609176002021199
White 009176003011106 069176701601000 069176701701000 069176701701003 609176003021100 609176003021199
Black
N/A
N/A
N/A
609176001021100 609176001021199
609176001021000 609176001021099
609176001021100 609176001021199
009176003011006 069176701601000 069176701701000 069176701701003 609176003021000 609176003021099
UL White 009176003011906 069176701601000 069176701701000 069176701701003 609176003021100 609176003021199
White 009176001022106 069176701602000 069176701702000
Black 009176001022006 069176701602000 069176701702000
UL White 009176001022906 069176701602000 069176701702000
White 009176002022106 069176701602000 069176701702000 069176701702002 609176002016100 609176002016199
Black 009176002022006 069176701602000 069176701702000 069176701702002 609176002016000 609176002016099
UL White 009176002022906 069176701602000 069176701702000 069176701702002 609176002016100 609176002016199
White 009176003022106 069176701602000 069176701702000 069176701702003 609176003016100 609176003016199
Black
N/A
N/A
N/A
609176001016100 609176001016199
609176001016000 609176001016099
609176001016100 609176001016199
009176003022006 069176701602000 069176701702000 069176701702003 609176003016000 609176003016099
UL White 009176003022906 069176701602000 069176701702000 069176701702003 609176003016100 609176003016199
White 009176001032106 069176701602000 069176701702000
Black 009176001032006 069176701602000 069176701702000
UL White 009176001032906 069176701602000 069176701702000
White 009176002032106 069176701602000 069176701702000 069176701702002 609176002016100 609176002016199
Black 009176002032006 069176701602000 069176701702000 069176701702002 609176002016000 609176002016099
N/A
N/A
N/A
609176001016100 609176001016199
609176001016000 609176001016099
609176001016100 609176001016199
UL White 009176002032906 069176701602000 069176701702000 069176701702002 609176002016100 609176002016199
White 009176003032106 069176701602000 069176701702000 069176701702003 609176003016100 609176003016199
Black
UL White 009176003032906 069176701602000 069176701702000 069176701702003 609176003016100 609176003016199
* Hand Insertion Tooling - Universal Hand Tool 067000773001000; Consult Application Notes 201-01-124
009176003032006 069176701602000 069176701702000 069176701702003 609176003016000 609176003016099
10
Discrete Wire IDC
Series 9176
18-24 AWG 1 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHOR BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 9.
3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 24 AND 18 GAUGE
STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND
APPLICATION NOTES 201-01-124.
6. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 16.
7. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 16.
Code
Accepted
Wire Gauge
A
Wire
Insulation
B
001 18 Gauge Stranded 0.72 Ø 1.6-2.1 2.1
011 20 Gauge Stranded 0.60 Ø 1.6-2.1 2.1
022 22 Gauge Stranded 0.47 Ø 1.1-1.6 1.6
032 24 Gauge Stranded 0.37 Ø 1.1-1.6 1.6
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY
LEADER
TRAILER
1000
480MM
120MM
11
Discrete Wire IDC
Series 9176
18-24 AWG 2 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHOR BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 9.
3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 24 AND 18 GAUGE STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND APPLICATION
NOTES 201-01-124.
6. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 16.
7. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 16
8. FOR PRESS WIRE ASSEMBLY TOOLING REFER TO PAGE 17.
9. FOR ACCESSORY CAPS REFER TO PAGES 14 AND 15.
Code
Accepted
Wire Gauge
A
Wire
Insulation
B
001 18 Gauge Stranded 0.72 Ø 1.6-2.1 2.1
011 20 Gauge Stranded 0.60 Ø 1.6-2.1 2.1
022 22 Gauge Stranded 0.47 Ø 1.1-1.6 1.6
032 24 Gauge Stranded 0.37 Ø 1.1-1.6 1.6
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY
LEADER
TRAILER
1000
480MM
120MM
12
Discrete Wire IDC
Series 9176
18-24 AWG 3 WAY IDC CONNECTOR
NOTES:
1. CONNECTOR FOR IDC WIRE TO BOARD CONNECTION.
2. CONTACT MATERIAL: PHOSPHOR BRONZE.
INSULATION MATERIAL: HIGH TEMPERATURE NYLON 46.
COLOR REFER TO PAGE 9.
3. CONNECTOR DESIGNED TO ACCEPT BETWEEN 24 AND 18 GAUGE STRANDED WIRE.
4. ALL DIMENSIONS FOR REFERENCE UNLESS OTHERWISE STATED.
5. FOR FULL PRODUCT SPECIFICATION REFER TO ELCO SPEC 201-01-106 AND APPLICATION
NOTES 201-01-124.
6. FOR PCB SPACE RESTRICTED BY WIRE ASSEMBLY TOOLING REFER TO PAGE 16.
7. FOR HAND WIRE ASSEMBLY TOOLING REFER TO PAGE 16
8. FOR PRESS WIRE ASSEMBLY TOOLING REFER TO PAGE 17.
9. FOR ACCESSORY CAPS REFER TO PAGES 14 AND 15.
Code
Accepted
Wire Gauge
A
Wire
Insulation
B
001 18 Gauge Stranded 0.72 Ø 1.6-2.1 2.1
011 20 Gauge Stranded 0.60 Ø 1.6-2.1 2.1
022 22 Gauge Stranded 0.47 Ø 1.1-1.6 1.6
032 24 Gauge Stranded 0.37 Ø 1.1-1.6 1.6
SMT PCB LAYOUT
PURE TIN PADS
PACKING DETAILS
REEL QTY
LEADER
TRAILER
1000
480MM
120MM
13
Discrete Wire IDC
Series 9176
60-9176-00X-0XX-X00
ACCESSORY CAP – THROUGH WIRE
NOTES:
1. CAP FOR IDC WIRE TO BOARD CONNECTION, 1, 2 AND 3
WAY, THROUGH WIRE.
2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE
PAGE 10 FOR THE CORRECT PART CODE TO MATCH WIRE.
3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS
SEE TABLE BELOW.
4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW.
5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION
DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM.
6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.
7. PACKED IN BAGS, 1000 PIECES PER BAG.
Code Slot A (AWG) Diameter B
Text
9176 Ø1.6
9176 Ø2.1
Color X00
Black 000
White 100
016 1.60 (22-24)
021 2.10 (18-20)
1.00
1.50
14
Discrete Wire IDC
Series 9176
60-9176-00X-0XX-X99
ACCESSORY CAP – WIRE STOP
NOTES:
1. CAP FOR IDC WIRE TO BOARD CONNECTION, 1, 2 AND
3 WAY, WITH WIRE STOP.
2. FOR USE WITH STANDARD 9176 IDC CONNECTORS, SEE
PAGE 10 FOR THE CORRECT PART CODE TO MATCH WIRE.
3. CAP MATERIAL: GLASS FILLED NYLON 46, FOR COLORS
SEE TABLE BELOW.
4. DIMENSIONS A, B AND TEXT, SEE TABLE BELOW.
5. CAPS DESIGNED TO ACCOMMODATE WIRE INSULATION
DIAMETERS 1.1MM TO 1.6MM AND 1.6MM TO 2.1MM.
6. ALL DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.
7. PACKED IN BAGS, 1000 PIECES PER BAG.
Code Slot A (AWG) Diameter B
Text
9176 Ø1.6
9176 Ø2.1
Color X99
Black 099
White 199
016 1.60 (22-24)
021 2.10 (18-20)
1.00
1.50
15
Discrete Wire IDC
Series 9176
HAND INSERTION TOOLING
FOR SINGLE 18/24 GAUGE WIRE
UNIVERSAL HANDLE
Tool
Part Number
Details
6.35 A/F HEX
BIT HOLDER
06 7000 7730 01 000
HIGH PRODUCTION
MEDIUM PRODUCTION
Metal
Metal/Plastic
Max
Max
Tool
Tool
Insulation Dia
Part Number
(AWG)
Insulation Dia
Part Number
(AWG)
2.10 (18-20)
1.60 (22-24)
06 9176 7017 01 000
06 9176 7017 02 000
2.10 (18-20)
1.60 (22-24)
06 9176 7016 01 000
06 9176 7016 02 000
CLEARANCE AREA ON PCB FOR HAND TOOLING
2 WAY 3 WAY
1 WAY
16
Discrete Wire IDC
Series 9176
INSERTION TOOLING
REQUIRES HAND PRESS WITH FLAT ROCK PLATES
2 WAY
3 WAY
HIGH PRODUCTION
Metal
Max
Insulation Dia
(AWG)
No.
Tool
Part Number
of Ways
2.10 (18-20) 06 9176 7017 01 002
1.60 (22-24) 06 9176 7017 02 002
2.10 (18-20) 06 9176 7017 01 003
1.60 (22-24) 06 9176 7017 02 003
2
3
2 WAY
3 WAY
NOTES:
1. DIMENSIONS SHOWN ARE REFERENCE DIMENSIONS.
2. MAXIMUM COMPONENT HEIGHT 1.00MM IN THIS AREA.
3. MAXIMUM COMPONENT HEIGHT 6.00MM IN THIS AREA.
4. THE SAME RESTRICTIONS APPLY TO ALL WIRE INSULATION DIAMETERS
5. 2 AND 3 WAY TOOLS ONLY, FOR USE UNDER HAND PRESS WITH FLAT PLATES.
6. FOR HAND TOOLING REFER TO PAGE 16.
17
相关型号:
©2020 ICPDF网 联系我们和版权申明